Tools. Apps. Ideas for faster karting.

Measure.
Improve.
Go faster.

The quickest and easiest way to measure your kart’s rear width accurately, without a helper.

Precision drives performance.

Top view of a kart rear axle with the laser holder on the outside of the right rim and the wheel cap on the outside of the left rim The laser sits in its holder flush with the outside edge of the right rim and sends a beam along the axle to the wheel cap on the left rim. A dimension line below spans the two outside rim edges and reads 1395 millimetres. Top view · rear axle Outside edge Outside edge Cap Laser 1395 mm
Example reading shown.
At Monarto this weekend See the Rear Track Gauge Laser on display at the Karting Central / DJM Race Engineering truck at the SA Kart Championship, Monarto Karting Complex, 20–22 November. Easy to find in the pits. Or buy online for delivery anywhere in Australia.

The gauges

Two ways to read the width

Both use the same rim insert and wheel cap, so the measurement runs straight down the centre of the axle. Pick the readout you prefer.

A tape measure pushed through the rim insert on a kart rear wheel, reading about 1400 mm at the reference line

Rear Track Gauge

Tape-based

A rim insert with a flush reference line at one end and a stop cap at the other. Push a normal tape measure through the axle until it bottoms out and read the number at the line. One person, no helper.

Measures
Outside rim edge to outside rim edge
You supply
Any tape measure
Price
$50 AUD (tape measure not included)
Postage
Online orders: calculated at checkout
The laser measure locked in its holder on the outside of a kart rear wheel, display facing up

Rear Track Gauge Laser

Digital readout

The same insert with a handheld laser measure locked in a printed holder. Switch on, set the reference to front, press once and read the width on the display.

Measures
Outside rim edge to outside rim edge, along the axle centre
Kit
Laser holder, wheel cap, laser measure, quick start card
Price
$130 AUD
Postage
Online orders: calculated at checkout
In stock
Karting Central / DJM Race Engineering truck, SA Kart Championship, Monarto (20–22 Nov)

Rear Track Gauge Laser

Fit, switch on, read

Side view of both rear wheels showing the wheel cap and laser holder on the outside of the rimsThe laser holder sits on the outside edge of the right rim with the laser front level with the rim edge. The beam runs along the axle to the wheel cap on the left rim. A dimension below spans the two outside rim edges.1395 mmOutside edgeOutside edgeWheel capLaser holderLaserLaser front level withthe outside edge of the rimAxle, shortened
Side view of both rear wheels. Shortened along the axle. The laser front sits level with the outside edge of the rim.
  1. Fit the holder

    Fit the laser holder on the outside of one rear wheel and the wheel cap on the outside of the other, in line with the axle.

  2. Set the reference to front

    Switch on, then long press the reference key until the display icon changes. Front is the laser end. Check it every time you switch on.

  3. Measure

    With the laser dot on, press the measure key. The reading is the width in metres: 1.395 m is 1395 mm.

Quick start card (PDF) A4 sheet, 4 cards A6 card, prints at home. The A4 sheet has four cards to cut.

At the track

  • The Apex wheel cap fitted across the rim of a kart rear wheel
    Wheel cap on the far wheel.
  • Hands sliding the laser measure into its holder on a kart rear wheel
    Laser slides into the holder.
  • A mechanic sighting along the wheel while fitting the laser holder
    One person, no helper.

Photos by Bens Gallery, Australian Kart Championship Round 5. Tap a photo to enlarge.

Apps

Software for race day

RS3 Sync

Available now · Desktop

Sync your onboard video with your AIM data. A desktop tool for AIM data logger users, sold as a one-time purchase.

Visit rs3sync.com

KartTimer

In development · Android first

Track lap times for up to four karts at once, with delta display, auto-split and saved sessions. Built for the pit wall.

Chassis Gauge

Planned

A laser-level chassis straightness checker, to sit alongside the rear track gauges.

Enquire

Talk to us

The quickest way to get a Rear Track Gauge Laser is to call in at the Karting Central / DJM Race Engineering truck at the SA Kart Championship at Monarto this weekend (20–22 November), where it is in stock and on display. Otherwise, buy online, or email to ask a question, order from overseas or arrange a trial for your team.

Contact

apexkartworks@gmail.com

Include your kart class and kart make (or inner rim size, if you know it) so we can supply the right fit. Most karts use a 118 mm rim and some use 116 mm.

Where to find us

  • Karting Central / DJM Race Engineering, SA Kart Championship, Monarto Karting Complex, 20–22 November
    Rear Track Gauge Laser in stock and on display in the DJM truck. Easy to find in the pits, so come and have a look.
  • Buy online
    Rear Track Gauge Laser, $130 or Rear Track Gauge, $50. Postage is calculated at checkout. Overseas, email us for a postage quote.

Photo: Bens Gallery · click to zoom